Steel 101

Steel is the only material that can be used as a retro fit over  asphalt shingles…no tear off, no land fill..just use a good  engineer and architect for weight reinforcement and super  insulation to create an energy efficient-low carbon  footprint retro fit.

 (www.StudioBScottsdale.com,

If you are serious about building Green….with steel.

Follow the Eco-smart checklist?

Consider the following questions and make an intelligent green decision about the steel you use.

1. What the recycled content? Our Bare Naked is be post consumer is 70% of which is 100% USA domestic scrap.
2. What is the life span of the steel? 5, 10, 60 to 120 years?
3. Untreated Steel is Greener. Less Toxic
4. Is Cool Roof Technology a real energy benefit to your area? Sometimes not.
5. Where it is produced-USA only, we can no longer afford to dump unregulated steel into the USA.
6. How it is created-how green is the manufacturing plant that the raw steel comes from?
7. BOF or EAF? Two totally different furnaces and worlds apart.
8. Logistics. Can you source this product locally? Is the material railed or trucked?

• Local US Manufacturer….local owned businesses are better, and we have to support local manufacturing our a huge part of our USA economy will be lost forever.

Our check list will get you very close to deciding if you current supplier is giving you facts or just a nice marketing spin.

All our claims can be validated with MTR reports, Heat and coil verification, ASTM verification and documentation from the mill of origin. This information is on our Eco-Smart check list.

Alli ReauVeau-President and Education Specialist
602-618-9401
Alli@Steeliq.com

Here is a list of FAQ!

FAQ:

 Bare Naked Steel™ is available in ASTM A606 Type 4 (COR-10™) and ASTM A1008 (Cold Roll).

Recycled Content:
•Bare Naked Steel™ has 8.6% pre-consumer and 56.8% post consumer recycled content.
•100% of the scrap used domestic (USA) scrap steel.
•Manufactured & Melted in the USA by an ISO 14001 Certified mill.
Electric Arc Furnace:
•EAF technology is employed at mill of origin.
•EAF use 67% Less coal and can start or stop at a flip of a switch.
•EAF uses 47% Less energy than BOF (Blast oven furnace).
Life Span: See Life Cycle Analysis
•22GA-life span of 10-70-120 years depending on environment.
•Painted steel is usually 29GA which is much lighter-which is why it must be coated with paint. Paint is only 1-3mm thick. The paint companies offer the warranty not the steel.
•There is no warranty on Bare Naked Steel™
Installation:
•Steel IQ, Inc. does not offer installation.
•Installation of Bare Naked Steel™ is the same as any other steel roofing material. A qualified contractor will know how to install correctly. Use a local steel roofing contractor.
•Make sure the contractor you specify is licensed and bonded.

The roofing contractor is responsible for proper installation, leak and workmanship warranties.
FAQ on Trim and Screws. (See Trim and Gutter Page for CAD drawings)
Trim:
•Trim material may be specified and delivered with panels.
•Trim material may be ordered in coil for local onsite trim professionals.
Screws:
•Galvanized Koko brown or Terra Cotta
•Stainless Steel
Panels:
•Panels arrive “gray” and naturally oxidize. We do not recommend Pre-oxidizing panels prior to installation.
•Oxidation will occur naturally. The luxurious rusty finish will complete in 2-4 weeks depending on environment.
•If you prefer to speed up the process, we recommend a mixture of one part household vinegar and two parts salt water, misted on panels after installation with a sprayer.
Maintenance of Steel:
•No maintenance of Bare Naked Steel™ is necessary.
•Mother Nature does all the work…as Green goods should be!
•If you prefer to speed up the process, we recommend a mixture of one part household vinegar and two parts salt water, misted on panels after installation with a sprayer.
Panel Coverage:(See panel page for CAD Drawings)
•7/8” Corrugated: The width of the panel is 37”. Roofing coverage is 32”. Wall coverage is 34 2/3”. Square footage is based on 36”.
•½” & 7/8 Corrugated: The width of the panel is 26”.
Coverage is 24”. Square footage is based on 24”.
•R-Panel & Big Rib: The width of the panel is 36” coverage is 36”. Square footage is based on 36”.
•Standing Seam: The width of the panel is 16”. Coverage is 16”.
Square footage is based on 16”.
Delivery:
•Nationwide delivery available.
•Most shipments can be partnered with other orders to limit freight cost and fuel.
•Shipping costs are subject to change.
•Verify all shipping costs 24hrs prior to shipping.
Call us, fill out our quote for or call your local distributor for more info.

Visit our Facebook (under Alli ReauVeau/Steel IQ fan page) for photos and project photos.
www.steeliq.com

To be Bare Naked Steel must meet or exceed the following detailed…FAQ on Bare Naked Steel :
Bare Naked Steel™ is  USA Made and Manufactured.

ASTM A606 Type 4 (COR-10™)  or ASTM A1008 (Cold Roll).

Recycled Content:•

Bare Naked Steel™ has 8.6% pre-consumer and 56.8% post consumer recycled content.

•100% of the scrap used domestic (USA) scrap steel.•Manufactured & Melted in the USA by an ISO 14001 Certified mill. Electric Arc Furnace:

•EAF technology is employed at mill of origin.•EAF use 67% Less coal and can start or stop at a flip of a switch.

•EAF uses 47% Less energy than BOF (Blast oven furnace).Life Span:•22GA-life span of 40-70-100 years depending on environment.

•Painted steel is usually 29GA which is much lighter-which is why it must be coated with paint. Paint is only 1-3mm thick. The paint companies offer the warranty not the steel.

•There is no warranty on Bare Naked Steel™Installation:

•Steel IQ, Inc. does not offer installation.•Installation of Bare Naked Steel™ is the same as any other steel roofing material. A qualified contractor will know how to install correctly. Use a local steel roofing contractor.

•Make sure the contractor you specify is licensed and bonded. The roofing contractor is responsible for proper installation, leak and workmanship warranties.

Trim and National Delivery!
Trim:

•Trim material may be specified and delivered with panels.

Trim material may be ordered in coil for local onsite trim professionals.

No job is too small….in fact: Fax us any “take off” from a competitor and we will meet it or beat it!